WiEPOut T1
Secure wireless relay control over an encrypted sub-GHz 902–928 MHz radio link. 2 dry-contact channels + 3 DC signal channels replace up to 5 wired paths. No Wi-Fi, no Bluetooth, no software required.
Key Features
- Encrypted sub-GHz 902–928 MHz radio link (no Wi-Fi, no Bluetooth)
- Up to 1,000 ft range (tested outdoors, units 6 in. above ground)
- 2 dry-contact channels + 3 DC signal channels (replaces up to 5 wired paths)
- ECDH P-256 key exchange with AES-CMAC per-packet authentication
- No software or computer required; setup is done with DIP switches
- FCC Part 15 compliant (SDoC; independently tested by F2 Labs)
Specifications
- Connectivity
- Encrypted sub-GHz LoRa link, 902–928 MHz. No Wi-Fi or Bluetooth. Range up to 1,000 ft (tested outdoors, units 6 in. above ground)
- Power
- 12 V DC input (12 V power adapter included). +12 V aux output (pin 7), 100 mA max continuous (250 mA absolute max)
- Environmental
- Operating temperature: −20 °C to +70 °C
Overview
The WiEPOut T1 is a point-to-point wireless control link for industrial solid-state switching applications. Two units mirror dry-contact and DC signals over an encrypted sub-GHz 902–928 MHz radio link, replacing up to five wired paths. It has no Wi-Fi and no Bluetooth, and it does not need a network, gateway, or cloud service.
Key Features
- Sub-GHz Radio: Encrypted LoRa link in the 902–928 MHz ISM band
- Range: Up to 1,000 ft (tested outdoors, units 6 in. above ground)
- Five I/O Channels: 2 opto-isolated dry-contact channels + 3 PinSync DC signal channels
- Secure: ECDH P-256 key exchange with AES-CMAC per-packet authentication
- Simple Setup: No software or computer required. Mode and channel are set with DIP switches
- Compliance: FCC Part 15 compliant (SDoC; independently tested by F2 Labs)
Technical Specifications
Radio
- Band: 902–928 MHz (sub-GHz ISM)
- Modulation: LoRa
- Range: Up to 1,000 ft (tested outdoors, units 6 in. above ground)
- Wi-Fi / Bluetooth: None
I/O
- Dry-Contact Channels: 2 (opto-isolated, solid-state)
- DC Signal Channels: 3 (PinSync)
- GPIO Reference Voltage: 5–48 V recommended (3.3 V works)
Power
- Input Voltage: 12 V DC
- +12 V Aux Output (pin 7): 100 mA max continuous (250 mA absolute max)
Environmental
- Operating Temperature: −20 °C to +70 °C
Security
- Key Exchange: ECDH P-256
- Authentication: AES-CMAC on every packet
Compliance
- FCC Part 15 compliant (SDoC; independently tested by F2 Labs)
Applications
Wireless Relay Control
Press a button or close a contact on one unit and the paired unit follows. Commands are authenticated and acknowledged.
Wireless I/O Sync
Mirror DC-level signals between two locations. PinSync works as a “wireless level shifter” for discrete I/O.
EPO Signaling
WiEPOut T1 can carry an EPO (emergency power off) signal between two locations where running wire is not practical.
WiEPOut T1 is not a safety-rated device and must not be the sole means of emergency shutdown or personnel protection.
Getting Started
No software or computer is required:
- Attach your cables to the included mating terminal plug
- Set mode and channel with the DIP switches
- Connect the included 12 V power adapter
- The units link automatically
What’s in the Box
Every WiEPOut T1 unit ships with everything it needs. A kit is two single units boxed together.
- Single unit: 1× WiEPOut T1 unit, 1× mating terminal plug, 1× 12 V power adapter, 1× USB cable
- Kit: 2× WiEPOut T1 units, 2× mating terminal plugs, 2× 12 V power adapters, 2× USB cables
Documentation
Datasheets, manuals, and optional host software are available in the Downloads section.
Support
Need help getting started or have questions? Visit our Support page for assistance.
Ordering
WiEPOut T1 is sold through DigiKey:
- WiEPOut T1 Kit (WIEPOUT-T1-KIT): $999. $949 each at 4+, $899 each at 8+
- WiEPOut T1 Single Unit (WIEPOUT-T1-UNIT): $599
See the Pricing & Ordering page for volume and custom quotes.
Ready to Order WiEPOut T1?
Available now through DigiKey. Contact us for volume quotes and technical questions.